-
Brand new from Apeks comes the WSX-45 sidemount harness, a feature-rich sidemount harness system which comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack. The bladder is constructed from Armoguard, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard Cordura (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind. The Apeks “SlideLock” sliding D-ring is brand new and unique to Apeks. It allows the diver to easily change the position of the cylinders as their buoyancy changes during the dive. No need to clip your cylinder on and off, simply adjust the position of the D-ring during your dive. The two-piece plate system is adjustable to nearly any torso length, making this a one size fits all system. The system also has individual webbing sections rather than one long piece running through the harness, which means the complete system can be quickly and easily adjusted. Bladder: 27lbs lift Armoguard exterior Additional protective layer of Armoguard protects the bladder against abrasions in confined spaces Reversible inflator can be mounted on left or right side Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body Harness: Solid 2” (5cm) webbing comes pre-assembled Removable crotch strap made of 2” (5cm) soft webbing 4x two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap) 2x “SlideLock” sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive 2x stainless steel drop D-rings along the lower back are for connection to the the included butt pack, or for marker buoys, reels or other accessories Heavy-duty waist buckle made of stainless steel Two-piece stainless steel plate allows the torso length to be adjusted to fit any diver Zippered Butt Pack with stainless steel snap hooks included Weight pouches are mounted on the spine strap and hold over 18lbs (9kgs) of weight Comes complete with two sizes of bungee and five stainless steel bolt snaps Two grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements. -
One of the first vented rubber fins. Drain holes and a bottom traction feature foot pocket. The heavy duty stainless steel buckles have threaded bolt and locknut for easy replacement. Two sizes available L and XL.- Neutrally buoyant
- Large foot pocket
- Grommet holes for hooking up fins
-
WR-01
For cave wreck diving or just general purpose utility use Light weight with handle. Three functions: Free, Stop and Skip adjustable switch. Nylon yard length: 150 Feet (45 Meters). Great for drift diving, safety stop switch to use a lift bag for signaling. -
With its revolutionary composite wave rib technology, Phazer is designed to provide balance and power thanks to it tri-material construction and advanced water channel system to optimize energy with every kick. -
WR-02
For cave wreck diving or just general purpose utility use Light weight with handle. Three functions: Free, Stop and Skip adjustable switch. Nylon yard length: 300 Feet (90 Meters). Great for drift diving, safety stop switch to use a lift bag for signaling. -
WR-03
For cave and wreck diving. Spool of 50 and meters with 3mm yellow lanyard, carabiner and double light brass. -
The Shredder SAR Fins are designed specifically for water rescue and SAR swimming. Ultra-light technopolymer blade provides optimized power and snap with up to 50% less weight and bulk. New blade technology reduces drag, increases lift and propulsion, as well as providing efficient water flow for improved thrust while greatly reducing ankle and leg fatigue. Heavy-duty fin straps with adjustable buckles provide customized fit for maximum comfort, leverage, and power while eliminating "slop" and chaffing. Integrated quick-release leash secures and retains fins. Soft foot pocket with heel pad provides excellent comfort and is designed to fit most large neoprene and molded sole dive/rescue boots (including boots integrated on ice rescue suits). Features:- Heavy duty adjustable buckle with padded heel and leash
- Large foot pocket receives large wetsuit boots and EVO4 boots
-
WR-03H
For cave and wreck diving. Spool of 50 and meters with 3mm yellow lanyard, carabiner and double light brass. With handle. -
FN-550
When Fining in the Up-Stroke, due to the Angle of the Vent, the Fin Reacts as a Solid Blade for Maximum Power and Propulsion. Jet Fins come equipped with Strong and Durable Adjustable Rubber Fin Straps with Metal Buckles for Bulletproof Reliability. -
FN-500S
This model JetFins has 3 main channels to push water backwards to assist with efficiency and power. The best quality rubber makes this fin ultra durable and long lasting.Some plastic fins are positively buoyant, so when you’re in proper position which should be 10 degrees midline of horizontal, they can bring your feet up too high and keep reaching for the sky so to speak, bringing you inverted and to the point where if you don’t correct it to a point where you turtle flipping and rolling.
A little bit of weight from the fin, not in the form of ankle weights (which will bring you legs down too low) may keep your feet in the perfect position.
-
WR-04
For cave/wreck diving or just general purpose utility use. Light weight with a plastic cap. Tow functions: Free and Stop switch. Nylon land yard length: 150 Feet (45 Meters). -
FN-580
Aquatec Warwolf Fins come equipped with Strong and Durable Adjustable Rubber Fin Straps with Metal Buckles for Bulletproof Reliability. This fin features a 'boot-fit' design enabling divers to use booties while also being easy to don on and off due to the spring strap. The softness and firmness of the boot make the ankle movement smoother. -
The fully tested and certified BandMask® 18 may be used in mixed gas diving as well as shallow water air diving.
The SuperFlow® adjustable demand regulator provides low inhalation resistance and high gas flow letting the diver breathe easier and work harder. This mask comes standard with the 455 Balanced Regulator. The 455 is an all stainless steel regulator with superior breathing performance. The Side Block Assembly of both the BandMask® 18 and 28 receives the umbilical over the shoulder in the B configuration. They both come standard with the Tri-Valve® exhaust system, and the new BandMask® BandKeepers®. The Tri-Valve® Exhaust System has less breathing resistance than the older single valve exhaust. It retrofits to all previous Kirby Morgan BandMasks®. The BandMask® BandKeepers, coupled with the redesigned hood, not only prevents any separation of the hood from the mask but also makes it impossible for the bands to separate from the mask. -
The fully tested and certified BandMask® 28 may be used in mixed gas diving as well as shallow water air diving.
The SuperFlow® adjustable demand regulator provides low inhalation resistance and high gas flow letting the diver breathe easier and work harder. This mask comes standard with the 455 Balanced Regulator. The 455 is an all stainless steel regulator with superior breathing performance. The Side Block Assembly of both the BandMask® 18 and 28 receives the umbilical over the shoulder in the B configuration. They both come standard with the Tri-Valve® exhaust system, and the new BandMask® BandKeepers®. The Tri-Valve® Exhaust System has less breathing resistance than the older single valve exhaust. It retrofits to all previous Kirby Morgan BandMasks®. The BandMask® BandKeepers, coupled with the redesigned hood, not only prevents any separation of the hood from the mask but also makes it impossible for the bands to separate from the mask. -
HH-05
The BC Hose Holder keeps gauges and regulators right where you put them. Aquatec HH-05 Scuba Hose Clip has easy snap designs that is very easy to use hoses snap in and out of the holder. The HH-05 Scuba Hose Clip fits most low and high pressure hoses designed to clip on your BCD. Aquatec HH-05 dive hose clamps are designed by using plastic ratchet-type hose clamps. Great for all two hose regulators, double hose regulator mouthpiece end; thus, no tools needed to install or remove! Hose Clip is for secure your gauges attachment of gauges and octopus that constructed of lightweight plastic material. The HH-05 Scuba Hose Clip is in two hose that is an Ideal for holding high pressure hose or octopus allows the Clip to lay flush along the divers profile to streamline the diver and to prevent the hoses attached from snagging on gear or the reef. Very useful for keeping your diving equipment hoses stable so they don't move around. Hose Clip is for secure attachment of gauges and octopus. Aquatec Hose Clip is a great accessory to keep your hoses secure and easily perfect for holding low/high pressure hoses, regulators, and gauges. This simple little hose clip to your gear will prevent you from dragging your gauges on the reef and causing damage. It's worth the money and saves a reef. This selection of hose clips which are designed for scuba divers but can also be useful for many watersports. What more could a diver want! -
The IST J800-1000D Hope Scuba Diving Value Priced, Heavy Duty BC / BCD is a reliable, full-featured BCD that’s durable enough to be used as a rental BCD, yet affordably priced.- Diving BCD with durable 1000D Cordura shell
- Cold water capable power inflator with pull dump, 2 additional rear quick dump valves
- Adjustable sternum strap and cummerbund for a custom fit, padded backpack for added support and comfort
- 2 roomy cargo pockets with velcro closure
- Delrin D-rings offer multiple points of attachment
- Ideal for use as rental equipment
