-
Colors : Black / Orange | Black / Grey -
Brand new from Apeks comes the WSX-45 sidemount harness, a feature-rich sidemount harness system which comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack. The bladder is constructed from Armoguard, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard Cordura (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind. The Apeks “SlideLock” sliding D-ring is brand new and unique to Apeks. It allows the diver to easily change the position of the cylinders as their buoyancy changes during the dive. No need to clip your cylinder on and off, simply adjust the position of the D-ring during your dive. The two-piece plate system is adjustable to nearly any torso length, making this a one size fits all system. The system also has individual webbing sections rather than one long piece running through the harness, which means the complete system can be quickly and easily adjusted. Bladder: 27lbs lift Armoguard exterior Additional protective layer of Armoguard protects the bladder against abrasions in confined spaces Reversible inflator can be mounted on left or right side Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body Harness: Solid 2” (5cm) webbing comes pre-assembled Removable crotch strap made of 2” (5cm) soft webbing 4x two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap) 2x “SlideLock” sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive 2x stainless steel drop D-rings along the lower back are for connection to the the included butt pack, or for marker buoys, reels or other accessories Heavy-duty waist buckle made of stainless steel Two-piece stainless steel plate allows the torso length to be adjusted to fit any diver Zippered Butt Pack with stainless steel snap hooks included Weight pouches are mounted on the spine strap and hold over 18lbs (9kgs) of weight Comes complete with two sizes of bungee and five stainless steel bolt snaps Two grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements. -
We didn't give the RK3 fin a shoe size range as this can be very misleading. The environment that an RK3 is used in will tend to dictate the size of fin that you need, for example do you dive in a warm environment wearing wetsuit boots, or are you walking across pebbled beaches and wearing a drysuit and rigid dry boots? Both forms of footwear may be a size 9, but will take up different amounts of space in the fin foot pocket. -
NEWThe RK3 HD fin is the latest in the RK3 range. It is made from a higher density (HD) material than the standard RK3 which makes the fin stiffer and negatively buoyant, ideal for drysuit diving. Sizes M, L and XL available. -
Whatever your overhead environment, your guideline reel is one of the most important parts of your kit. Invest in an Apeks LifeLine Guide and you’ll have one of the finest reels on the market. It doesn’t just look good, it plays good. Designed to be used both left and right-handed, the Lifeline Guide is simple to operate, even if you’re wearing thick gloves. From the easy grip rubber handle to the over-sized locking screw, our reel allows you to concentrate on your dive. High grip rubber handle makes the reel easy to hold with or without gloves. High tensile strength and high visibility line is both extremely strong and visible in low light conditions. The stainless-steel attachment point allows for secure attachment of the reel to a D-ring, BCD or pocket. Ambidextrous configuration allows the reel to be used in both left and right hands at the same time as a torch. Oversized locking screw is easy to operate with or without gloves. Textured friction plate allows you to manually add tension to the spool when laying line. -
Designed to make deploying your delayed surface marker buoy a breeze, the 30 metre Apeks Lifeline Ascend is the finest reel on the market. It doesn’t just look good, it plays good. Designed to be used both left and right-handed, the Lifeline Ascend is simple and smooth to operate, even if you’re wearing thick gloves. From the easy grip rubber handle to the secure stainless-steel attachment points, the Lifeline Ascend sets a new standard in dive reels. -
The Halo spool is the latest addition to the Apeks Lifeline Spool family and is a true innovation in the diving market. The large diameter of the Halo fits perfectly in the hand and allows simple, controlled deployment of the SMB, and rapid line retrieval, even when wearing thick gloves. -
Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres -
Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres -
Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres -
Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres -
NEWThe MTX-RC 50th anniversary edition is exceptional in more ways than one. Featuring a unique coating, commemorative coin, and detailed pamphlet on Apeks’ history, all wrapped up in premium packaging for an exclusive dive regulator like no other. Apeks is celebrating 50 years, and to commemorate we have launched a special limited edition MTX-RC regulator, featuring a luxury PVD coating. Each regulator comes with a commemorative coin matching the regulator’s serial number, and an exclusive unboxing experience to match the occasion. Celebrate with us and become #OneOfTheFew to own a piece of Apeks History. -
Go warm, go cold, go deep, go anywhere. Enjoy control in the extreme with the MTX-RC scuba diving regulator. Combining rugged, military grade engineering with the super-smooth breathing experience that Apeks regulators are renowned for, the MTX-RC is the regulator that lets you explore more. Featuring the same freeze-resistant technology enjoyed by the whole MTX-R range, the MTX-RC resists free-flows in even the coldest temperatures, while offering the user the additional flexibility to adjust the settings for a more comfortable breathe in less extreme environments. All this is achieved using an innovative first stage design that protects the regulator from freezing and a full set of user controls on the second stage to adjust the breathing performance based on the diver’s individual needs. Includes a tactical style messenger bag to keep your regulators safe on your travels. Perfectly sized for a laptop, it’s also your new work bag! -
The MTX-R is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R regulator performs in almost freezing water at a depth of over 60 metres, something that very few other regulators on the consumer market can boast. With an innovative first stage design that helps to prevent ice build up around the diaphragm, the MTX-R is reliable, rugged and expedition ready. A first of its kind, over-moulded first-stage end cap and environmental diaphragm to prevent ice build-up that could cause a free flow in extreme circumstances. Forged 1st stage body gives maximum thermal performance. Ribbed diaphragm clamp on the 1st stage ensures improved heat exchange in cold water conditions. Angled HP ports allow for optimal hose routing and transmitter fitting. Parallel turret ports allow for improved hose orientation. Superb protection from impact damage on both the 1st and 2nd stage. Simple to use 2nd stage with no dive adjustment controls and a reduced chance of free flow. Double swivel hose for greater freedom of movement and comfort. Patented heat exchanger surrounds the valve mechanism, dissipating the cold caused by gas expansion while drawing in the warmth of the ambient water. Developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Tested for Octopus use to 60 metres in cold water. -
The Octopus MTX-RC is the perfect complement to the MTX-RC regulator, combining the robust, military-grade technology and effortless breathing for which Apeks regulators are renowned. It is fitted with a highly visible yellow cover and a yellow 90 cm hose. Yellow highlights for visibility in an emergency Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places. Ergonomic and simple to use venturi lever. Large purge button. Reversible second stage for either a left or right hand gas supply configuration. A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe.
