-
Suitable for anyone wanting top-end comfort and performance, the ThermiQ 8/7 is also kinder to our environment. The suit is made from limestone-based neoprene, instead of the more traditional chemical-based petroleum neoprene. One of the key ingredients used in producing neoprene, Carbon Black, is made from recycled car tyres instead of oil and the yarn that creates the soft lining of the suit is made from recycled plastic bottles. A highly efficient 8mm on the core provides extra thermal protection where it is needed most and 7mm on the arms and legs allows for flexibility. Large cargo pockets are ideal for stashing your accessories and an integrated hood provides additional warmth. An across the chest zipper makes it easy to put on, while internal cuffs on the forearms and lower leg minimise water ingress. The ThermiQ 8/7 is supplied with a simple and effective change mat to protect your feet and wetsuit while getting changed. The mat doubles up as a shoulder bag to carry your wet gear inside, featuring a drawstring closure, carry straps and aluminium G-Hook closure for extra security.Super-stretch eco-neoprene (8mm torso and 7mm arms and legs) -
This innovative, low profile design minimizes drag. The pneumatically balanced valve provides superior performance for an alternate air source, making it a perfect complement to the high performing Apeks regulators. Unique 120˚ angle between the mouthpiece and the hose, which is ideal for sharing air with your buddy. Large purge – easy to use either way up. Can be routed over either shoulder. Low profile ensures less drag in water and keeps it close to the body out of the way. Bright colours ensure visibility in panic situations. Breathes smoothly when positioned right side up or upside down. High visibility 36” yellow hose distinguishes your Egress hose from your primary hose and is easily spotted in the event of an out-of-air emergency. If used with an unsealed first stage then it is only recommended for warm waters, but is suitable for cold water diving when used with any Apeks environmentally sealed first stage. -
Suitable for anyone wanting top-end comfort and performance, the ThermiQ 8/7 is also kinder to our environment. The suit is made from limestone-based neoprene, instead of the more traditional chemical-based petroleum neoprene. One of the key ingredients used in producing neoprene, Carbon Black, is made from recycled car tyres instead of oil and the yarn that creates the soft lining of the suit is made from recycled plastic bottles. A highly efficient 8mm on the core provides extra thermal protection where it is needed most and 7mm on the arms and legs allows for flexibility. Large cargo pockets are ideal for stashing your accessories and an integrated hood provides additional warmth. An across the chest zipper makes it easy to put on, while internal cuffs on the forearms and lower leg minimise water ingress. The ThermiQ 8/7 is supplied with a simple and effective change mat to protect your feet and wetsuit while getting changed. The mat doubles up as a shoulder bag to carry your wet gear inside, featuring a drawstring closure, carry straps and aluminium G-Hook closure for extra security.Super-stretch eco-neoprene (8mm torso and 7mm arms and legs) -
The AT Octopus is a great match for the AT regulator. It provides the same features and performance as the AT second stage but comes with a high visibility yellow front cover and a 36” yellow hose. It is designed for water temperatures above 50º F (10º C) -
A fully balanced regulator at an entry level price. Warm water use only (above 10C / 50F). -
This Octopus is based upon the ATX second stage with proven cold water capability and the performance you would expect from an Apeks pneumatically balanced valve. It features a diver-adjustable venturi control, a high visibility yellow front cover, yellow accent pieces and a 36” yellow hose. -
Before the XTX range of regulators came along, the ATX models ruled the seas. The ATX is still available today and offers a fully balanced first and second stage with cold water capability (can be used in all temperatures including those below 10 C / 50 F). This high-performance regulator boasts an over-balanced first stage coupled with a pneumatically balanced second stage. The smooth, quiet breath is sure to enhance your diving enjoyment. Suitable for coldwater use thanks to its first stage environmental dry seal and second stage heat exchanger. Compatible with EAN40 out of the box. -
XTX technology is also available in an oxygen model. This regulator is built for oxygen percentages between 0 – 100%. This compatibility coupled with its excellent reliability make it the choice for technical divers doing high O2 percentage deco stops. Green and yellow cosmetic pieces clearly identify that this regulator is dedicated for high-percentage oxygen use. The compact DS4 first stage has four medium-pressure ports and one high-pressure port (it does not feature the rotating turret found on the DST first stage). Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. Only the narrow exhaust tee is supplied with the regulator. Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available in yoke or DIN configuration. A braided flexi-hose comes standard. These hoses are lighter weight, more flexible and more durable. Suitable for coldwater use (below 10 C / 50 F). This regulator is suitable for use with up to 100% oxygen. -
The DS4 first stage lacks the rotating turret found on the XTX50 first stage and offers one HP port. This compact first stage is a time-proven workhorse that has been embraced by the technical community around the world. This compact first stage has four medium-pressure ports and one high-pressure port. Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician. -
The Apeks ThermiQ Carbon Core sets new standards in base layer thermal protection. Comfort is guaranteed with the triple layer soft shell, combined with the technically advanced graphene lining to give the ultimate in warmth and flexibility. Triple layer soft shell fabric ensures the top keeps you warm in all environments. The ThermiQ Carbon Core can be worn on its own as a thermal rash guard in warm water or as an extra layer underneath a drysuit. Advanced lining is made from graphene wrapped fibres which acts as a superconductor, regulating skin temperature by transferring heat from warm spots to cold spots on the body. Breathable fabrics prevent moisture build up when used underneath a drysuit. Elasticated thumb loops keep the top in place when wearing under a drysuit. Colors: Black/Bright Green -
The XTX50 Octopus is our top-of-the-line Octopus in terms of features and performance. It provides the same features and performance as the XTX50 second stage and includes left / right hand reversibility. It comes with a high visibility yellow front cover and a 36” yellow hose. Suitable for cold water use (below 10 C / 50 F). The XTX50 Octopus has a breathing effort control knob. This allows the diver to desensitize the unit when it not being used. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc. Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician. -
Apeks Nitrox regulators are suitable for use with up to 100% O2 and are colour-coded for easy identification. The regulators have been specially cleaned and assembled in our purpose built class 'J' (10,000) Clean Room using oxygen safe components and lubricants and are available in yoke ('A') clamp or DIN fitting. The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimal hose routing while eliminating sharp bends in the hose. Nitrox equipment will be supplied in Europe in accordance with the EN 144-3 and the EN13949 which states that equipment sold in CEE (European Community) countries over 21% and up to 100% will be manufactured with the special M26 fitting. Four medium-pressure ports all mounted on a rotating turret. This results in optimal hose routing while eliminating sharp bends in the hose. Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees. Optional 5th port is available for sidemount or twin cylinder set ups. Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available in yoke or DIN configuration. Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable. Suitable for coldwater use (below 10 C / 50 F). Compatible with EAN40 out of the box. -
The Apeks ThermiQ Carbon Core sets new standards in base layer thermal protection. Comfort is guaranteed with the triple layer soft shell, combined with the technically advanced graphene lining to give the ultimate in warmth and flexibility. Triple layer soft shell fabric ensures the top keeps you warm in all environments. The ThermiQ Carbon Core can be worn on its own as a thermal rash guard in warm water or as an extra layer underneath a drysuit. Advanced lining is made from graphene wrapped fibres which acts as a superconductor, regulating skin temperature by transferring heat from warm spots to cold spots on the body. Breathable fabrics prevent moisture build up when used underneath a drysuit. Elasticated thumb loops keep the top in place when wearing under a drysuit. Colors: Black/Bright Green -
The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimal hose routing while eliminating sharp bends in the hose. Four medium-pressure ports all mounted on a rotating turret. This results in optimal hose routing while eliminating sharp bends in the hose. Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees. Optional 5th port is available for sidemount or twin cylinder set ups. Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available in yoke or DIN configuration. Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable. Suitable for coldwater use (below 10 C / 50 F). Compatible with EAN40 out of the box. -
The Apeks ThermiQ Carbon Core sets new standards in base layer thermal protection. Comfort is guaranteed with the triple layer soft shell, combined with the technically advanced graphene lining to give the ultimate in warmth and flexibility. Triple layer soft shell fabric ensures the top keeps you warm in all environments. The ThermiQ Carbon Core can be worn on its own as a thermal rash guard in warm water or as an extra layer underneath a drysuit. Advanced lining is made from graphene wrapped fibres which acts as a superconductor, regulating skin temperature by transferring heat from warm spots to cold spots on the body. Breathable fabrics prevent moisture build up when used underneath a drysuit. Elasticated thumb loops keep the top in place when wearing under a drysuit. Colors: Black/Bright Green -
The XTX 200 is second only to the XTX Tungsten and quite rightly enjoys its position towards the top of the Apeks regulator range. The definitive blend of style and high performance, every detail on this product has been carefully designed to offer a regulator of the highest quality. Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees. An optional 5th port is available which features the additional bonus of an integrated heat exchanger (available on the Tungsten, XTX200 and XTX100 first stages). Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available in yoke or DIN configuration. Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable. Suitable for coldwater use (below 10 C / 50 F). Compatible with EAN40 out of the box. -
The Apeks ThermiQ Carbon Core sets new standards in base layer thermal protection. Comfort is guaranteed with the triple layer soft shell, combined with the technically advanced graphene lining to give the ultimate in warmth and flexibility. Triple layer soft shell fabric ensures the top keeps you warm in all environments. The ThermiQ Carbon Core can be worn on its own as a thermal rash guard in warm water or as an extra layer underneath a drysuit. Advanced lining is made from graphene wrapped fibres which acts as a superconductor, regulating skin temperature by transferring heat from warm spots to cold spots on the body. Breathable fabrics prevent moisture build up when used underneath a drysuit. Elasticated thumb loops keep the top in place when wearing under a drysuit. Colors: Black/Bright Green -
The XTX Tungsten is built on the XTX200 platform but is protected with a hard, durable Physical Vapor Deposition (PVD) finish. This “tough as nails” finish is better than traditional chrome plating. The coating is made of high quality grades of Titanium, Zirconium and Chromium. The result not only looks extremely attractive, but protects your investment from normal diving abuse. The XTX Tungsten is supplied complete with a 5th port. Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees. -
The Apeks XL4+ is a compact lightweight regulator suitable for diving in all environments including cold water locations. Its design and low weight help reduce jaw fatigue on long dives. The XL4+ also makes an ideal stage regulator, perfect for the exploration diver with a large amount of equipment. The XL4+ regulator is a high-performance option for those divers serious about weight savings. -
NEWThe Ocea is the first of its kind – an environmentally-conscious regulator made from recycled materials and bio-plastics, manufactured in a solar-powered facility. Based on the XL4+, every single material and process was reconsidered to create the most eco-sensitive scuba diving regulator in the world. The Ocea is a truly game-changing regulator that removes five times its own weight in plastic from the environment. -
NEWThe Ocea is the first of its kind – an environmentally-conscious regulator made from recycled materials and bio-plastics, manufactured in a solar-powered facility. Based on the XL4+, every single material and process was reconsidered to create the most eco-sensitive scuba diving regulator in the world. The Ocea is a truly game-changing regulator that removes five times its own weight in plastic from the environment. -
The perfect octopus to complement your MTX-R regulator. Yellow highlights for visibility in an emergency Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places. Large purge button. Reversible second stage for either a left or right hand gas supply configuration. A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe. -
Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres -
The MTX-R is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R regulator performs in almost freezing water at a depth of over 60 metres, something that very few other regulators on the consumer market can boast. With an innovative first stage design that helps to prevent ice build up around the diaphragm, the MTX-R is reliable, rugged and expedition ready. A first of its kind, over-moulded first-stage end cap and environmental diaphragm to prevent ice build-up that could cause a free flow in extreme circumstances. Forged 1st stage body gives maximum thermal performance. Ribbed diaphragm clamp on the 1st stage ensures improved heat exchange in cold water conditions. Angled HP ports allow for optimal hose routing and transmitter fitting. Parallel turret ports allow for improved hose orientation. Superb protection from impact damage on both the 1st and 2nd stage. Simple to use 2nd stage with no dive adjustment controls and a reduced chance of free flow. Double swivel hose for greater freedom of movement and comfort. Patented heat exchanger surrounds the valve mechanism, dissipating the cold caused by gas expansion while drawing in the warmth of the ambient water. Developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Tested for Octopus use to 60 metres in cold water. -
Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres -
The Octopus MTX-RC is the perfect complement to the MTX-RC regulator, combining the robust, military-grade technology and effortless breathing for which Apeks regulators are renowned. It is fitted with a highly visible yellow cover and a yellow 90 cm hose. Yellow highlights for visibility in an emergency Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places. Ergonomic and simple to use venturi lever. Large purge button. Reversible second stage for either a left or right hand gas supply configuration. A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe. -
Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres
